Category: SRRC

 China SRRC certification – Apply SRRC  samples and data

Sample Request

1.If the built-in module without certification, please provide fixed frequency prototype 5 units (lead RF line), fixed frequency tools 5, fixed frequency software and operating instructions.

2.If the built-in module has been certified and meets the requirements of the Ministry of Industry and Information Technology (MIIT) Document No. 1 of 2014, please provide a complete fixed-frequency prototype  and the built-in module certificate, one fixed-frequency tool, fixed-frequency software and operating instructions.Please note:  Each sample must have a label (nameplate) and a unique identification code (serial number or number).

Data Request

A:Have you registered an account in the “National Integrated Online Government Service Platform” or “Ministry of Industry and Information Technology Government Service Platform”, if not, please provide the following information, we will help you to register

1.Proof of organization and Chinese translation, with signature stamp

2.Scanned copy of legal person’s passport

B:All files need to be in Chinese and the file size should not exceed 5M: (Each model)

1.Application form, commitment letter (Annex)

2.Scanned copy of business license and Chinese translation of the business license

3.Scanned copy and signature of the passport of the manager.

4.If the product is produced by the applicant, provide the applicant’s ISO quality system certificate (the scope of the certificate needs to include the product category of this application), if not need to provide a description of technical capabilities, production capacity and quality assurance system (can refer to the annex).

5.If the applicant commissions the production on behalf of the factory, it is necessary to provide the applicant and the factory’s commissioning contract and the factory’s ISO quality system certificate or system status statement.

6.Whole machine schematic diagram, block diagram, product manual, product technical manual, RF part BOM (fill in the attachment), RF module/chip specification, antenna specification, antenna gain and line loss description (see attachment), product six-sided photo + internal photo (attachment).

7.Nameplate (including applicant name, product model, CMIIT ID: XXXXXXXXXXXXX, etc.)

SRRC certification

State Radio Regulatory Commission of the People’s Republic of China

SRRC is a mandatory certification requirement of the National Radio Regulatory Commission. Since June 1, 1999, the Ministry of Information Industry (MII) of China has mandated that all radio component products sold and used in China must obtain a radio model Radio Type Approval Certification (Radio Type Approval Certification).

At present, China’s SRRC certification is all managed and issued by the Ministry of Industry and Information Technology of the People’s Republic of China.

Wireless products sold in the Chinese market must apply for SRRC certification as long as they are in the SRRC product catalog. For example, Bluetooth, wifi, zigbee, 2g, 3g, 4g, 5g products are typical SRRC compulsory certification products.

We have an RF testing laboratory in Guangzhou, which can provide customers with pre-testing, data sorting, registration with the Ministry of Industry and Information Technology of China, and one-stop SRRC testing and certification services.

You are welcome to consult us, please contact David Zeng info@emc.wiki or 1513888718@qq.com , We can provide one-stop testing, EMC debug and certification services.

Information to be submitted for SRRC certification

SRRC requirements are as follows:
Samples: 6 units are provided(1 set as a backup), of which 4 prototypes need to lead out radio frequency cables. Different RF product samples may have different requirements, but basic BT and WIFI need to provide 6 prototypes.

document:
A. Has the applicant registered an account in the SRRC reporting system? If not, please provide the following information, and our company will help you register; if you have already registered, please provide your account and password.

  1. Color scanned copy of the applicant’s business license (the copy is affixed with the official seal, and the foreign company provides organization certification materials and Chinese translation, and the official seal is added)
  2. A copy of the legal person ID card with official seal
  3. Contact phone number of the handler

B. Application materials (all documents must be in Chinese, and the file size should not exceed 5M):

  1. Application form, letter of commitment, (attached, please fill out and confirm with our company)
  2. Color scanned copy of the applicant’s business license (can be ignored if provided),
  3. Power of attorney with official seal and scanned copy of ID card (see attachment)
  4. If the product is produced by the applicant, provide the applicant’s ISO quality system certificate, if it is not necessary to provide technical capabilities, production capacity and quality assurance system description (including at least the main production equipment model, number or quantity) production line, production plan, Corresponding testing equipment, etc.);
  5. If the applicant entrusts factory production, the contract between the applicant and the factory and the factory’s ISO quality system certificate or system description (including at least the main production equipment model, number of sets or production line, production plan, corresponding testing equipment, etc.);
  6. Block diagram, circuit diagram, product technical manual, RF part BOM (fill in the attachment form), RF module specification, antenna specification;
  7. Nameplate (including applicant name, product model, CMIIT ID: XXXXXXXXXXX, etc.)

Please provide priority in preparation for system registration

  1. Applicant’s business license (color drawing and official seal)
  2. Power of attorney (seal)
  3. A copy of the legal person’s ID card and a copy of the handler’s ID card (color trace and official seal)

For more SRRC details infomation, please contact David Zeng info@emc.wiki or 1513888718@qq.com

SRRC Type Approval and Certification Sample Quantity Requirements

There are often customer inquiries as to how many samples are required for SRRC certification, the type of radio transmission equipment approved, the type of equipment and the number of samples, as detailed below: In principle, the samples mentioned below refer to the complete prototype that has been applied for certification, or the module that has been applied for certification, etc. If the prototype is very large, you can provide a complete prototype according to the requirements of different laboratories, or provide other modules in the form of modules. For details, please contact David Zeng  info@emc.wiki or 1513888718@qq.com

Equipment typeQuantity of samples submittedQuantity of test samplesAccessories and sample requirements
2.4GHz spread spectrum communication equipment53The sample can transmit modulation and carrier signals continuously at a fixed frequency;
Provide detailed frequency list and rate list;
Provide equipment testing software and methods, which can set parameters such as transmit power and frequency;
Provide radio frequency test interface;
Provide the RF test cable and the attenuation value of the applied frequency band, and the antenna gain value;
If there is no serial number on the test sample, it needs to be provided separately.
5.8GHz spread spectrum communication equipment53The sample can transmit modulation and carrier signals continuously at a fixed frequency;
Provide detailed frequency list and rate list;
Provide equipment testing software and methods, which can set parameters such as transmit power and frequency;
Provide radio frequency test interface;
Provide the RF test cable and the attenuation value of the applied frequency band, and the antenna gain value;
2.4GHz band wireless LAN equipment53The sample can transmit modulation and carrier signals continuously at a fixed frequency;
Provide the bandwidth, transmission rate, and transmission channel supported by the device;
Provide RF test interface, number of RF cables and antennas, antenna gain and RF cable attenuation instructions for the applied frequency band; 4. Provide equipment test software, test methods and necessary test tools;
If there is no serial number on the sample sent, the customer needs to provide it separately.
If the type of sample submitted for inspection is a module, a statement of whether the module is restrictive or complete shall be provided;
If the sample submitted for inspection is a complete device made of a module that has been model-approved, in addition to the above information, the device must also meet the conditions for radiation testing, and provide a differentiation statement and the original device and the original module model approval certificate.
For Bluetooth devices, it should clearly support the version (such as 2.0, 4.0, 5.0), mode (such as BR, EDR, LE) and rate. For Bluetooth devices that use the signaling test mode, the tested sample should be adjusted to the signaling test mode. Integrated with Bluetooth
The tester establishes a test connection.
5.8GHz band wireless LAN equipment53The sample can transmit modulation and carrier signals continuously at a fixed frequency;
Provide the bandwidth, transmission rate, and transmission channel supported by the device
Provide radio frequency test interface, radio frequency
Description of the number of cables and antennas, antenna gain, and RF cable attenuation of the applied frequency band;
Provide equipment test software, test methods and necessary test tools, and can set parameters such as transmit power and frequency;
If there is no serial number on the sample sent, the customer needs to provide it separately.
If the type of sample submitted for inspection is a module, a statement of whether the module is restrictive or complete shall be provided;
If the sample submitted for inspection is a complete device made of a module that has been model-approved, in addition to the above information, the device must also meet the conditions for radiation testing, and provide a differentiation statement and the original device and the original module model approval certificate.
GSM terminal53Provide sample radio frequency test interfaces, including schematic diagrams of the positions of the radio frequency test interfaces of each standard of 2G/3G/4G;
Provide RF test cable and attenuation value of the applied frequency band;
The sample can establish a communication connection with the integrated tester through the radio frequency cable, and the integrated tester is controllable
Prepare samples to change radio frequency parameters such as transmit power and working frequency;
At least one sample can establish a communication connection with the comprehensive tester through radiation;
The IMEI number read out via the dial keypad “*#06#” or related software should be consistent with the IMEI number posted on the back of the sample;
Non-mobile phone devices need to provide test accessories needed to ensure the normal operation of the sample (such as setting the operation of opening the mobile network, the command code of the AT command and its software, the schematic diagram of the device serial line connection, the positive and negative poles of the power supply, and the set voltage Value or current value, etc.);
If the device supports the authentication and security function (WAPI), a list of key components related to WAPI should be provided.
Public walkie talkie53The sample can transmit modulation and carrier signals at a fixed frequency;
Provide equipment test software and methods, which can set parameters such as transmit power and frequency; 3. Provide RF test interface;
Provide the attenuation value of the RF test cable and the applied frequency band;
If there is no serial number on the test sample, it needs to be provided separately.
800/900MHz band radio frequency identification (RFID) equipment53The sample can transmit modulation, carrier signal and frequency hopping working signal at a fixed frequency;
Provide equipment testing software and methods, which can set parameters such as transmit power and frequency;
Provide radio frequency test interface;
Provide the attenuation value of the RF test cable and the applied frequency band, and the antenna gain value;
If there is no serial number on the test sample, it needs to be provided separately;
If the type of sample to be inspected is a module, it is necessary to provide a statement whether the module is restrictive or complete.
Internet of Vehicles (Intelligent Connected Cars) Directly Connected Communication Radio Equipment53Provide sample RF test interface, including
2G/3G/4G radio frequency test interface location diagram of each standard;
Provide RF test cable and attenuation value of the applied frequency band;
The sample can establish a communication connection with the integrated tester through the radio frequency cable, and the integrated tester can control the sample to change the transmission power and working frequency.

Download the Radio Frequency Division Regulations of the People’s Republic of China

Everyone knows that SRRC model approval is required in China. So, do you know which frequencies can be used? Does it mean that I can use which frequency to do SRRC? Below are related products regulated by the country, and the frequencies that can be used must not be used casually. Yes, different products use different frequencies, so as to ensure that they do not interfere with each other, to ensure the full use of the spectrum, and to ensure the quality of communication without interference.

Radio-Frequency-of-the-Peoples-Republic-of-ChinaDownload

For more information about the availability of radio frequencies in China, please contact David Zeng  info@emc.wiki or 1513888718@qq.com

What product needs SRRC type approval?

Everyone knows that SRRC is needed in China, so, do you know which products need to be SRRC certification?

  1. Public network mobile communication equipment
    01 Cellular public network mobile communication base station and auxiliary equipment
    02 Cellular public network mobile communication terminal equipment
  2. Dedicated communication equipment
    01 FM equipment (Ultrashort wave radio for maritime services)
    02 Digital walkie-talkie equipment
    03 public walkie-talkie
    04 Simulate cluster equipment
    05 Digital Trunking Equipment
    06 Police Digital Trunking Equipment
    07 Simulate non-central equipment
    08 Digital non-central equipment
    09 Data Transmission Equipment
    10 Fixed wireless video transmission equipment
    11 Dedicated mobile wireless video transmission equipment
    12 Shortwave single sideband equipment
    13 GSM-R railway special equipment
    14 Paging device
    15 800/900MHz band radio frequency identification (RFID) equipment
    16 5.8GHz electronic toll collection system
    17 230MHz band wireless data transmission equipment
    18 Ultra-wideband (UWB) equipment
    19 Internet of Vehicles (Intelligent Connected Cars) Directly Connected Communication Radio Equipment
  3. Wireless access equipment
    01 400MHz wireless access equipment
    02 1785-1805MHz frequency band wireless access system
    03 3.5GHz band fixed wireless access equipment
    04 26GHz band wireless access equipment (LMDS)
    05 40-50GHz frequency band point-to-point wireless access system
    06 Broadband wireless access system in 40-50GHz frequency band
    07 Digital microwave equipment
    08 2.4GHz spread spectrum communication equipment
    09 5.8GHz spread spectrum communication equipment
    10 2.4GHz band wireless LAN equipment
    11 5150-5350MHz band wireless access equipment
    12 5.8GHz band wireless LAN equipment
    13 60GHz band wireless access equipment
  4. Broadcast transmission equipment
    01 Broadcasting equipment
    02 TV equipment
  5. Radar equipment
    01 Weather radar
    02 Aviation radar
    03 Marine radar
    04 Vehicle radar
    05 Surveillance radar
  6. Navigation equipment
    01 Aviation communication and navigation equipment
    02 Other navigation equipment
  7. Satellite communication equipment
    01 Satellite Earth Station
  8. Other equipment
    01 Amateur radio equipment
    02 Unmanned aircraft system equipment
    03 Radio control equipment
    04 Meteorological aids

Radio transmission equipment model approved equipment type, SRRC product range catalog, download as follows:

China-SRRC-product-catalogDownload

For more SRRC catalog information about China SRRC certification, please consult David Zeng info@emc.wiki or 1513888718@qq.com